A scissor lift, also known as an aerial work platform, is a machine that has been designed for working at various heights safely and efficiently. Scissor lifts are great tools for maintenance workers who need access to difficult-to-reach areas such as rooftops or ceilings inside buildings without having to climb up a ladder. Before you use either of these pieces of equipment, it is essential to follow a reputed forklift course in Melbourne or even an onsite forklift training in Melbourne, where you will be taught all the essential elements of using this type of equipment. Forklifts are ideal for warehouses since all of the controls are within easy reach. They are powered by gas or electricity, with the front wheel being driven by gears from the engine. The biggest difference between a forklift and a scissor lift is that forklifts have two large wheels in contact with the ground while scissor lifts have four wheels with two of them being the drive wheels. A forklift consists of a mast which provides stability and support. Scissor lifts are great tools for maintenance workers who need access to high places. A forklift has a front end that forks out like a bulldog's jaws and can hold up to 20 tonnes of weight; whereas a scissor lift is designed with two sets of articulated arms that support the load from either side and is typically used for lighter tasks. Forklifts often have counterweight capabilities, which allow them to hold an additional weight on their forks or platform in order to maximize stability when lifting heavier items; however, scissor lifts cannot be equipped with counterweights because they would make it difficult for operators to manoeuvre around tight spaces easily. Forklifts also tend to need more regular maintenance than scissors lifts do due their larger size and greater power requirements. Forklifts have an operator cabin where the driver sits, which is surrounded by safety rails. This protects them from being crushed if they collide with something during transport; whereas scissor lifts do not have an enclosed cabin so there is no protection from being crushed in case it collides with something while working. The forklift driver must be trained in order to operate the machine safely, which is why they need to follow a course in forklift truck training in Melbourne or elsewhere. Forklift driver training is usually provided by manufacturers, service providers and professional training companies. Forklift drivers are constantly at risk of injury if they do not follow the correct procedures when operating a forklift so it is essential that proper safety measures are put in place to reduce these risks as much as possible. Proper maintenance ensures safe operation by eliminating potential hazards before they occur which reduces the possibility for accidents to happen. The following recommendations should be followed:Ensure you have knowledge on how to use your equipment properly; this includes knowing all controls, warnings, markings, signs; etc.Ensure you know where first aid kit is located along with fire extinguisher location (if required).Make sure all other operators/workers near or around the lift understand its movements. Different types of forklifts will be used for different tasks. For example, rough terrain forklift trucks are better at carrying heavy loads on uneven surfaces while standard ones can carry lighter loads more easily inside buildings. Forklifts and Scissor lifts are both used to do heavy work. They differ in their method of lifting the load, as well as how they can be used. A forklift hoists a load by using two forks that extend from under the front axle and tilt upwards, while a scissor lift moves a load by extending its platform up or down on hydraulic arms. These differences impact what type of material is appropriate for each machine; forklifts typically carry pallets with uniform weights (e.g., wood) whereas most materials best suited for use with scissor lifts vary widely in weight (e.g., paper). This allows them to serve different purposes. Forklifts often come equipped with attachments and accessories, all of which are extensively covered in a forklift course in Melbourne, which is why it is important to follow such a course and gain certification before working with such equipment.