3 card poker online

Run Car On Hydrogen – How To Run Your Car With Water

Technology improves as days pass by. New things are being created and life becomes more convenient. Today, along with the shortage of energy sources, many eco-friendly things are being invented. One good example of this is a car running on hydrogen. This type of technological advancement does not really mean you have to replace gas. You will just make use of water to lessen your consumption of gas. This will also increase the efficiency of your engine. The idea is to create HHO gas. This works best for heavy duty automobiles such as trucks or rigs. Another great thing about it is its price. Because it mainly uses water, it is much cheaper than the usual. It can also be used for both old and new cars. How do you make one? In this article, we are going to discuss basic steps on turning your gasoline-powered car to a hydrogen-powered one. The first step is to get screw caps. You will need two of these. They should have a length of 12 inches and a diameter of 3 inches. The material should be PVC so that it will be safe even at high temperature environments. Unscrew one of the caps and label it as the top. The second step involves drilling. You need to drill a hole which is 0.5 inches in diameter. It should also be 2 inches deep to be able to hold the top firmly. Place the PVC tubing on the hole and keep it in place using a silicone or cement. The third step is to make steel plate strips. You can do this with a hacksaw or any steel cutter. The strips should have a standard size. Length should be 3 inches and the width should be 0.5 inches. You need to make a dozen of these strips. Once you have finished cutting, you need to drill one hole at the end of each of them.The fourth step is done by drilling two holes on the generator. The two holes should be 6 inches far from the top of the generator you are making. This is very important in order to be able to keep the steel plates strip steady in place. After doing this, you need to use the silicone to cover the holes in order to prevent water from entering. The fifth step is connecting the battery. The batter has a cable that you need to connect to the bolts. After connecting it, you need to mount your HHO generator. This is a very important step in order to make sure that the battery will reach the generator. The sixth step is to use baking soda for the steel plates. Baking soda and water will help the generator generate more power. You should then connect the battery to the terminals of your car in order to use the power to start it up. You are now done and you can now use water to power your car. This will help you save money and energy. 

Shall not be reproduced without permission:3 card poker online » Run Car On Hydrogen – How To Run Your Car With Water